Shingle Pro
Synthetic Roofing Underlayment

Shingle Pro Synthetic Roofing Underlayment

Epilay® Shingle Pro Synthetic Roofing Underlayment

Epilay® Shingle Pro Roofing Underlayment with its advanced engineering is highly recommended for mechanically attached, coated woven synthetic roofing underlayment for sloped roofs. Epilay® Shingle Pro is specifically manufactured to replace the #15 felt and #30 felt.

Epilay® Shingle Pro is 25 times stronger than 15# felt and 5x lighter than 15# felt. With a 6.5 mil thickness, a 10 square roll weighs only 19lbs! This super low weight combined with 48" width and 250 ft. run length means big savings in time and labor - over 30% faster to install than felt!.

These unique design features, when coupled with Epilay® Shingle Pro exceptional light weight and exceptional tear strength, allows the contractor to easily carry the roll up and down the ladder. Fewer laps, cuts, and roll handling means you can do more jobs in less time resulting in huge savings for you, the roofing contractor.

Epilay® Shingle Pro Synthetic Roofing Underlayment Epilay® Shingle Pro Roofing Underlayment
  • Grip Walk

    Epilay™ GripWalk™ high-traction unique gray top layer provides for a cooler working surface and can be used under primary roofing materials to replace 30# felt. GripWalk™ high traction walking surface permits easier steep slope walkability, even during high condensation or moisture on the surface.

  • Skid Resist

    Epilay™ Skid-Resist™ is a very high anti-skid bottom surface made using superior technology and advanced polymers to help keep the underlayment intact and prevent the fabric from tearing while it is being fastened, avoiding any leakages through the underlayment layer.

Benefits

Epilay® Shingle Pro is a 100% synthetic composition providing the following benefits to the roofing contractor

  • 1 year UV protection
  • Water repellant, non-absorbent
  • 6.5 mil thickness
  • Works best for use under Asphalt shingles & metal roofs
  • Does not wrinkle, crack or become stiff in colder temperatures for smooth and easy installation
  • Epilay® Shingle Pro will not dry out or leach oil in high heat environments as organically saturated felts do
  • 5 times lighter and 25 times stronger than 15# felt
  • 20 years limited warranty
  • Class A Fire ASTM E 108 - Meets & exceeds ASTM D4869
  • ASTM D 8257 Approved
  • Synthetic construction impervious to mold growth
  • Plasfelt 4 ply underlayment (3 ply cross-woven coated polypropylene with a layer of non-woven polypropylene)
  • Temperature performance range -40°F to 260°F (-40°C to 126°C).
  • ASTM International

Epilay® Shingle Pro Downloads

Back